Notes, Plastic parts, Cleaning and maintenance – Panasonic EU7805K User Manual

Page 20

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

m

3

<Q

W

3*

■ CLEANING AND MAINTENANCE

Notes

• Do not handle the power plug with wet hands.

Failure to heed this warning may result in electric shock or personal injury.

•Always unplug the unit before cleaning.

Failure to heed this warning may result in electric shock.

Synthetic leather part

Wipe seat with a soft, dry cloth.

• Do not use any leather maintenance tools that are

commercially available (chemical cloth or chemicals).
This can cause discoloration or hardening of the synthetic
leather.

• If the synthetic leather is particularly dirty, wipe it in the

following manner.

1. Soak a soft cloth in water or a 3% to 5% solution of mild

detergent and wring it out thoroughly.

2. Dab the surface with the moistened cloth.
3. Rinse the cloth in water, wring it out thoroughly, and then

wipe any remaining detergent from the surface.

4. Wipe the surfaces with a soft, dry cloth.
5. Allow to dry naturally.

• If it is difficult to remove dirt, soak a commercially available

Melamine foam sponge in mild detergent and wipe the unit
with it.

• Do not use a hair dryer to dry the surface more quickly.
• Since colors may transfer from clothing to the synthetic

leather surface, be careful when using the unit with clothing
such as leans or colored clothes.

• Do not allow these areas to come in contact with plastic for

extended periods of time as this may lead to discoloration.

• Do not use a metal scrubber or a sponge with abrasives.
• Do not use thinners, benzine, or alcohol.

Plastic parts

1. Wipe the unit with a cloth moistened with mild detergent

and thoroughly wrung out.
• Do not use a metal scrubber or a sponge with abrasives.
• Do not use thinners, benzine, or alcohol.

2. Wipe the unit with a cloth moistened with plain water and

thoroughly wrung out.
• Be sure you thoroughly wring out the cloth first when

cleaning the control panel.

3. Allow the unit to dry naturally.

19

Advertising