Installation h (suspension brackets mounting), Installation in (joist mounting - ii), Joist situation – Panasonic FV-13VKML3 User Manual
Page 10: Suspension bracket connect method
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
INSTALLATION H (SUSPENSION BRACKETS MOUNTING)
Joist situation:
/i
Spacing A is 16 inches
$
%
(406 mm) to 24 inches
Joists
(609 mm) on center joists
/ii
1. If the spacing A is 16 inches (406 mm) to 24 inches
(609 mm) on center joists, please follow the
installation step as below.
2. Insert the suspension bracket I and II into the fan
body and suspension bracket III or IV into the
adaptor. (Select the suspension bracket connection
holes as shown below) (Fig.10, Fig.11)
Suspension bracket connect method:
Suspension bracket I and II connect with
screw I as shown below:
Unit: inches (mm)
Suspension
bracket II '
13 1/4 ~ 15 1/2 (336-394)
161/2
-18
3/4(419-480)
21 1/4 -23 1/2 (540-597)
, Suspension
3. Install the suspension bracket to joists by using long
screws (ST4.2X20)(Fig. 11) and secure it to the fan
body by using screw II (ST4.2X14) (Fig.12)
4. Follow steps 4 to 11 of installation i (page 8, page 9)
to complete the installation work.
Suspension bracket III
16 inches (406 mm) or
19 inches (483 mm) horizental joist
Suspension bracket IV
24 inches (609 mm) horizental joist
Unit: inches (mm)
6 Long screws
(ST4.2X20)
13 1/4-15 1/2 ( 336-394 )
161/2-18
3/4(419-480)
21 1/4-23 1/2 ( 540-597)
0-1 (0-25.4)
Fig.11
INSTALLATION in (JOIST MOUNTING - II)
Joist situation:
Spacing B is
/1
B
/1
10 1/2 inches (266 mm) to
111/2 inches (292 mm)
inches on joists
Joists
Fan body^
1. If the spacing B is 10 1/2 inches (266 mm) to 111/2
inches (292 mm) on joists, please follow the
installation step as below.
2. Secure 4 long screws (ST 4.2X20) at flange of frame.
(Fig. 13)
3. Follow steps 4 to 11 of installation I (page 8, page 9)
to complete the installation work.
10
4 Long screws
(ST4.2X20)
Fig.13