Installation i (joist mounting -i ) continued – Panasonic FV-13VKML3 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
INSTALLATION I (JOIST MOUNTING -I ) CONTINUED
4. Install a circular duct and secure it with clamps or wire
ties and seal it with mastic or approved duct tape.
(Fig.3)
5. Remove junction box cover and secure conduit or
stress relief to junction box knock-out hole. (Fig.3)
6. Refer to wiring diagram below.
Follow all the local electrical safety codes as well as
the National Electrical Code (NEC).
Using UL approved wire nuts, connect house power
wires to ventilating fan wires. (Fig.4-1, Fig.4-2)
CAUTION:
Mount junction box cover carefully so that lead
wires are not pinched.______________________
Note:
Wiring detail please refer to the wiring
diagram on pageS and page 6.