Acronova NB12 Series - Manual (Page 19)

Version 1.3 Operation Manual, Nimbie NB12
© 2011, Acronova Technology, Inc. 19
O
PERATION
Q
UICK
G
UIDE
Abort a Running Operation
To abort a duplication session, press and hold the
Test/Abort button for two seconds. If the recorder is
currently writing to disc, Nimbie is designed to abort the
duplication session after the recorder has completed writing
to disc.
Important:
Turning the power switch to the Off position will immediately
terminate the active duplication session, damaging any disc in the
process of being written to. Only turn off the power in case of
emergency.
Start a Duplication Session
High-Speed Duplication produces more discs per hour, yet
Norm-Speed better assures duplicate disc quality especially for audio
and video discs.
Follow the steps below to start a one-to-multiple disc duplication
session:
1) Load the master disc into the disc loader.
2) Load the desired quantity of blank discs on
top of the master into the disc loader.
3) Press either the High or Norm-Speed
Duplication button to start. Nimbie will run
the operation until the disc loader is empty.
Important:
In duplication mode whenever a rewritable disc is detected,
Nimbie is designed to always erase the disc. Do not use
rewritable discs as master discs because the data on the disc will
be erased.
Important:
To verify your written data, press the
Function Key which will light up its LED
and then press the High or Norm-Speed
Duplication button to start.