Acronova NB12 Series - Manual (Page 26)

Operation Manual, Nimbie NB12 Version 1.3
26 © 2011, Acronova Technology, Inc.
ƒ If Nimbie is showing an LED error please remove all the discs in
the loader. Be sure to check for any discs that may be stuck
inside the unit.
ƒ Press the NORM button and hold for five seconds to restart
Nimbie. You can also turn the power switch to the Off position
and back to the On position after waiting 30 seconds.
ƒ Nimbie may continue to show an LED error. After trying the
above suggestions with no result press and hold the FUNC button
until you see the LED display change. Please record the new
LED message.
ƒ Next press and hold the TEST button until the LED display
changes again. Please record the new LED message. Please
provide this information to the dealer along with the Nimbie serial
number located on the bottom of the unit.