Preparing to drive, starting the engine – Acura 2008 MDX - Owner's Manual User Manual

Page 343

Advertising
background image

CONTINUED

Check the adjustment of the

inside and outside mirrors (see

page

).

Check the steering wheel

adjustment (see page

).

Make sure the doors and tailgate

are securely closed and locked.

Fasten your seat belt. Check that

your passengers have fastened

their seat belts (see page

).

When you start the engine, check

the gauges and indicators in the

instrument panel, and the

messages on the multi-information

display (see pages

,

and

).

Without touching the accelerator

pedal, turn the ignition switch to

the START (III) position, then

release the ignition switch. You do

not need to hold the ignition

switch in the START (III) position

to start the engine. Depending on

the outside temperature, the

starter motor runs for about 6 to 9

seconds until the engine starts.

If you hold the ignition switch in

the START (III) position for more

than 7 seconds, the starter motor,

depending on the outside

temperature, runs for about 10 to

25 seconds until the engine starts.

If the engine does not start, wait at

least 10 seconds before trying

again.

Make sure the shift lever is in

Park. Press on the brake pedal.

In cold weather, turn off all

electrical accessories to reduce

the drain on the battery.

Apply the parking brake.

Your vehicle’s starting system has an

auto control mode. When you turn

the ignition switch to the START

(III) position, this feature keeps the

engine’s starter motor running until

the engine starts. Follow these

instructions to start the engine:

1.

2.

3.

4.

6.

7.

8.

9.

15

124

81

10.

63 72

154

Preparing to Drive, Starting the Engine

Starting the Engine

D

riv

ing

339

The immobilizer system protects your
vehicle f rom thef t. If an improperly-
coded key (or other device) is used, the
engine’s f uel system is disabled. For
more inf ormation, see page

.

128

2008 MDX

Table Of Contents

Main Menu

Advertising