Installing a child seat – Acura 2008 MDX - Owner's Manual User Manual

Page 51

Advertising
background image

CONTINUED

Your vehicle is equipped with

LATCH (lower anchors and tethers

for children) at each of the second

row seats.

To install a LATCH-compatible child

seat in either outer second row seat:

Move the seat belt buckle or

tongue away from the lower

anchors.

Make sure there are no objects

near the anchors that could

prevent a secure connection

between the child seat and the

anchors.

When you install a child seat in rear

seating position, use the lower

anchors as shown in the illustration.

You can install up to three child

seats at a time with LATCH.

Do not attach two child seat

connectors to a single lower anchor

at a time.

The location of each lower anchor is

indicated by a small button above the

anchor point.

The lower anchors are located

between the seat-back and seat

bottom, and are to be used only with

a child seat designed for use with

LATCH.

1.

2.

Installing a Child Seat with

LATCH

Installing a Child Seat

Using the Outer LATCH

Dr

iv

er

and

P

asseng

er

Saf
et

y

47

LOWER ANCHORS

MARKS

2008 MDX

Table Of Contents

Main Menu

Advertising