Wiper blades – Acura 2008 MDX - Owner's Manual User Manual
Page 416
Advertising
Examine the new wiper blades. If
they have no plastic or metal
reinforcement along the back
edge, remove the metal
reinforcement strips from the old
wiper blade, and install them in
the slots along the edge of the new
blade.
Slide the new wiper blade into the
holder until the tabs lock.
Slide the wiper blade assembly
onto the wiper arm. Make sure it
locks in place.
Lower the wiper arm against the
window.
Windshield: Lower the passenger’s
side first, then the driver’s side.
Remove the blade from its holder
by grabbing the tabbed end of the
blade. Pull firmly until the tabs
come out of the holder.
6.
7.
4.
5.
3.
Wiper Blades
412
BLADE
BLADE
REINFORCEMENT
2008 MDX
Table Of Contents
Main Menu
Advertising