Air cleaner element – Acura 2000 Integra Hatchback - Owner's Manual User Manual

Page 189

Advertising
background image

Air Cleaner Element

The air cleaner element should be

cleaned or replaced according to the
time and distance recommendations
in the maintenance schedule.

Cleaning (Severe Conditions)

Clean the air cleaner element by

blowing compressed air through it in
the opposite direction to normal air
flow. If you do not have access to
compressed air (such as a service

station), ask your Acura dealer to do

this service.

Follow the replacement procedure
for removal and reinstallation.

Replacement

The air cleaner element is inside the

air cleaner housing on the passenger's
side of the engine compartment.

To replace it:

1. Loosen the three bolts and remove

the air cleaner housing cover.

2. Lift up the old air cleaner element

and pull it out of the duct.

3. Carefully clean the inside of the

air cleaner housing with a damp

rag.

4. Attach the new air cleaner

element to the duct. Make sure
the tab on the duct fits in the
notch on the air cleaner element.
Install the new air cleaner element

in the air cleaner housing correctly
placing the square part of the
flange on the element in the
mating recess on the housing.

5. Reinstall the air cleaner housing

cover, tighten the three bolts.

Maintenance

BOLTS

AIR CLEANER ELEMENT

Main Menu

Table of Contents

Advertising