Acura 2000 Integra Hatchback - Owner's Manual - Manual (Page 208)

Lights
Headlight Aiming
The headlights were properly aimed
when your car was new. You should
check their aim if you regularly carry
heavy items in the cargo area or pull
a trailer. Each headlight assembly
has horizontal and vertical adjust-
ment indicators. These are set to
their "0" positions after the head-
lights are aimed at the factory.
To check these settings:
1. Make sure the fuel tank is full.
Park the car on level ground.
2. The driver or someone who
weighs the same should be sitting
in the driver's seat for all checks
and adjustments.
Load your vehicle with the items
you normally carry.
If you usually pull a trailer, load it as
you would normally and attach it to
the car. Push down on the front and
rear bumpers several times to make
sure the car is sitting normally.
3. Open the hood.
4. Check the horizontal angle gauge.
The line on the adjustment screw
indicator should line up with the
"0" mark on the gauge.
CONTINUED
Maintenance
HORIZONTAL ANGLE GAUGE
Left headlight Right headlight
Main Menu Table of Contents