CDA CI931 - Manual (Page 17)

Delay Timer
Delay timer selection button
s A delay of up to 24 hours can be selected. The delay must be selected after
choosing the wash programme.
s To set the required delay, press the delay timer button (Figure 26). Each
time the button is pressed the delayed start of washing is increased by
one hour.
Cancelling the delay
s To cancel the delay, press the delay timer button repeatedly to cycle
through the full 24-hours, and then press again.
s The delay will be cancelled when 24 hours have been reached and the
button is pressed once more. If the programme is changed the delay is
also cancelled.
Additional functions
Additional function selection button depending on programmes.
s There are 3 options: easy iron, extra rinse and intensive wash.
s Press the button and the desired option will be displayed (Figure 27).
s By pressing the button several times you can choose between several
combinations of one, two and up to three additional functions at the
same time depending on the programme selected (Figure 28).
Option 1: Easy-iron
This option prevents garments from creasing by means of carrying out a
special programme with special turns to fluff out the garments after
spin-drying and make them easier to iron.
Option 2: Extra rinse
Increases the level of the final rinse obtained in the clothes; suitable for large
loads and garments belonging to people with sensitive skin. However, this
option will increase your water consumption.
Option 3: Intensive wash
This option, specially recommended for heavily soiled or stained clothes,
achieves better results by extending the normal wash cycle.
If during the additional function selection, the programme is
changed or the Start/Pause button is pressed, all the functions
selected until then are cancelled.
15
option
delay
timer
spin
drying
time
fig. 26
option
delay
timer
spin
drying
time
fig. 27
option
delay
timer
spin
drying
time
fig. 28