CDA CI931 - Manual (Page 7)

Levelling
s To reduce the noise level from the washing machine and to prevent
unnecessary movement during use, you should ensure the washing machine
is level using the adjustable feet.
Please note: Raising the washing machine too high can affect the
stability of the appliance.
Electrical Connection
s Check the rating plate located on the porthole door of the washing
machine before connecting the appliance to the power supply. Ensure
that the voltage reaching the plug is the same as that on the plate.
Do not remove the rating plate. The information on it is important.
Do not plug the washing machine plug into the socket with wet or
damp hands.
To remove the power cord, pull on the body of the plug, not
the cable.
If the power cord is damaged, it must be replaced by a cord or
special unit provided by either the manufacturer or your aftersales
service.
If necessary, stand the washing machine on a piece of worktop or
similar, ensuring the worktop is flat on the floor.
fig. 9
fig. 7
fig. 8
5