AERCO Innovation (G-13-1854 and above) - Manual (Page 7)

Innovation Water Heaters Installation, Operation & Maintenance Manual
FORWARD
OMM-0078_0J
AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, NY 10913
Page 7 of
196
GF-128
Phone: 800-526-0288
PRI: 11/22/2013
FOREWORD
The AERCO Innovation Series Potable Water Heaters are modulating units which represent a
true industry advance that meets the needs of today's energy efficiency and environmental
concerns. Designed for use in any domestic water heating system, each Innovation model
provides precisely-controlled potable water within ±2°F of setpoint, regardless of flow rate.
Innovation’s compact size and varied venting capabilities allow maximum installation flexibility.
The Innovation Series Heaters, with their load tracking controls modulate over a 20:1
turn down
ratio to match the system demand and yield high thermal efficiencies.
Innovation Water Heaters are available in four (4) different sizes ranging from 600,000 BTU/Hr.
Input to 1,350,000 BTU/Hr. Input. In addition, all Innovation Heater sizes now include Water
Heater Management (WHM) software which is built in to the C-More Controllers furnished with
each unit. When the heater is ordered with a Sequencing Valve (SV), up to eight (8) Innovation
Water Heaters can be controlled by the WHM system utilizing RS485 Modbus protocol. All
available Innovation Water Heater models are listed in the table on the following page. As this
table shows, units can be ordered with Factory Mutual (FM) or Double Block and Bleed
(formerly IRI) Gas Trains with or without Sequencing Valves.
When installed and operated on natural gas in accordance with this Instruction Manual, the
Innovation Series Models covered herein comply with the NOx emission standards outlined in:
• South Coast Air Quality Management District (SCAQMD), Rule 1146.2
• Texas Commission on Environmental Quality (TCEQ), Title 30, Chapter 117,
Rule 117.465
Whether used in singular or modular arrangements, the Innovation Heaters offer the maximum
flexibility in venting with minimum installation space requirements. Innovation’s advanced
electronic controls offer simplified integration with today’s Energy Management Systems.
For service or parts, contact your local sales representative or AERCO International, Inc.
IMPORTANT
Unless otherwise specified, the descriptions and procedures provided in
this Installation, Operation & Maintenance Manual apply to all Innovation
Series Water Heaters.