Agasio A622W - Manual (Page 20)

[email protected] Page | 19 713-893-4514
Clicking this button will make the camera go on a horizontal
cruise. The camera will pan as far as possible to the left and then
as far as possible to the right.
Clicking this button will flip the image vertically, usually used
when a camera is mounted upside-down.
Clicking this button will flip the image horizontally, usually used
when a camera is mounted upside-down.
This button is used for turning on the IR night vision lights.
This button is used for turning off the IR night vision lights.
This button is used to control the PT Speed. This is found by
hovering over “Device Settings,” then clicking “PT Settings” The
lower the value, the faster the Pan/Tilt Speed will be.
This button is for setting a preset for the camera. Set the camera
to your desired area, then click this button, and click the preset
number you would like to save it to. Pan/Tilt cameras only.
This button is for calling a preset from the camera. If you have set
a preset to the camera already, click this button, then click the
number of the preset you would like to see. The camera will
automatically move to the set position. Pan/Tilt cameras only.
This setting changes the color of the OSD lettering, or can
remove the OSD entirely. OSD is the option that shows the date
and time on the live camera video feed. To find this option, hover
over “Device Settings” and hover over “OSD,” which will show
you the different options available.