Agasio A622W User Manual
Page 35
Page | 34
713-893-4514
2. Belkin routers do not ship with a password. If you have not set up a password to the router, just click
on Submit. Otherwise, type in your password and then click Submit.
3. Click on "Virtual Servers" under the Firewall category in the menu on the left side of your screen.
4. Enter the following information:
Check the box under the category that reads
“Enabled.”
Type a general description of the application; in this case it will be an Agasio Camera, so type IPCAM.
Type the port(s) that you have specified in the Inbound Port category. For our example in this manual,
we used port 99. Therefore we would insert “99” in the first and second fields.
Enter the Local IP address of the camera in the Private IP address field. This is the IP address of the
camera which should start with “192.” Enter the fourth part of the IP address in this field.