Digit, Setting modes on the digit – AirTurn DIGIT User Manual

Page 13

Advertising
background image

13

DIGIT

The AirTurn BT-105 DIGIT is a combination Bluetooth

transceiver that may be used in a variety of
settings. It offers a keypad with six
switches. The switches are also used to
change the unit’s mode and send different
characters in each mode. The DIGIT may
also be used with up to four momentary
footswitches, tongue or bite switches and in
a whole array of environments. (Please see
BT-105 instructions for pairing, charging

and other important information.)

Setting Modes on the DIGIT

1. Turn the DIGIT off.

2. Hold down the key symbol(s) for the mode you would like

to select.

3. Turn on the DIGIT.

4. Release the key as soon as you see the first LED light

flash.

You will see the LED blink red once, green for X number of
times based on the mode number, and then red one more
time. For example, when the Down Arrow is selected for mode
3, the red light will blink once, green 3 times and red once.

Your DIGIT comes programmed ready for mode 3. The
following chart shows all the options for each mode:

Advertising
This manual is related to the following products: