AirTurn DIGIT - Manual (Page 18)

18
BOSS FS-6 Footswitches
The BT-105 or DIGIT may also be
used with the BOSS FS-6
footswitch. Note that the FS-6
requires a separate 9V battery to
function. AirTurn supplies specially
made cables to function with the
FS-6. You can also make your own
cables with instructions available
on the AirTurn website.
You may choose to have either one FS-6 or 2 FS-6 devices
attached to your BT-105 or DIGIT. There is a different cable for
each configuration. The cable plugs into the center jack of the
FS-6. Be sure to set the switches on your FS-6 as shown here:
Please note the position of each switch. The A pedal has the
Mode and Polarity switches pointing away from each other and
the B pedal has both switches pointing towards each other.
You can slide the FS-6 switches together to make a 4-pedal
configuration by aligning the channels on each one and then