ALTANA Micro-Gloss Manual - Manual (Page 46)

45
12.1 Installation
Bluetooth® :
Please refer to the separate Bluetooth® Installation
Guide.
Software easy-link and USB drivers:
Insert the easy-link CD into the CD drive and run the
„setup.exe“ for installation of the program. Follow
the instructions on the screen.
After installation, the default directory of the
appropriate Excel Reports will be “...\bykware\easy-
link“.
As you connect the device to the USB port of the
computer, it is recognized by the system and the
hardware assistant opens:
1. Choose “Install from a list“ and click the button
“Next“. Then select the folder “USB Driver“ from the
easy-link CD. The driver setup begins. Note that if a
window displays a choice of buttons to “Continue
Anyway“ or “Stop Installation“ click on “Continue
Anyway“. Click the “Finish“ button to complete the
installation of the 1st driver.
2. After short time the hardware assistant opens for
installation of the 2nd driver. Continue the
installation as described above by following the
instructions.
After the setup is completed for both drivers, open
the gloss-link report from the easy-link folder.
Interface