ALTANA Micro-TRI-Gloss μ - Manual (Page 19)

18
English
7 Overview of main menu
Measurement without statistical evaluation.
Multiple measurement with statistics.
Measurement repetition (measuring interval adjustable).
Simplest mode: without saving and difference
Opens the “Mode” menu again with the previous
setting.
Select geometry and thickness sensor (Fe/NFe)
Save functions for samples:
Turn saving on/off.
Select memory area from list.
Up to 50 memory areas can be created.
Pre-set memory areas (M60°...) cannot be deleted.
Bring up contents of memory (use scroll wheel).
Settings for difference mode:
Turn difference measurement on/off.
Measure reference.
Select reference (if saved).
Save up to 50 references and enter limit values for
Pass/Fail.
Delete individual references.
Enter/change limit values for Pass/Fail.
Calibrate, change cal. values GU - % scale.
The following can be used together simultaneously:
• Save with:
• Difference with:
Mode
Sample mode
Statistics
Continuous
Basic mode
Advanced mode
Geometry/Sensor
Save
Save
Select memory
Create memory
Delete memory
Display memory
Difference
Difference
Measure reference
Select reference
Create reference
Delete reference
Change reference
Calibration
Setup
Sample mode, Statistics, Continuous
Sample mode, Statistics
Language, Display time, Date/Time, Beeper.