ALTANA Micro-TRI-Gloss μ - Manual (Page 29)

28
English
12 Geometry/Sensor
Sensor Selection:
The currently selected sensor is
indicated in the display by a check
mark.
Off
The film thickness sensor is
switched off.
Fe
Magnetic base metal (iron or steel)
NFe
Non-iron metal (e.g. aluminium)
Combi
When changing the substrate, the
sensor will be switched over
automatically
Choose the desired sensor with
the scroll wheel. Press mode to
confirm the desired selection.
The selected sensor is indicated in
the display.
Note:
The measurement unit can be
selected in —m or mil for display
(see section Calibration: Scale
Thickness).