ALTANA Cloud-Runner Manual - Manual (Page 12)

11
The saved results are transferred to the PC and
displayed as a QC report.
The data is saved in a database for further analysis
over time. Pre-prepared test reports in the smart-
chart software assist in analyzing the data.
Storage structure
Each measurement series contains a header and
the individual measurements with name (test zone)
and measured values.
In the header, up to 5 parameters can be defined for
object identification. Parameters 1 to 3 are defined
in the Organizer file, parameters 4 and 5 can be
entered before storage in the data base.
Additionally, date and time of the measurement are
stored.
This structure determines the data organization in
the instrument and in the data base. In addition to
using Organizers, i. e. definition of parameters
before the measurements, parameters and test
zones can also be entered during the
measurements. See chapter “Memory”.
System description and Delivery notes