ALTANA Cloud-Runner Manual - Manual (Page 45)

44
Interface
14. Interface
Connecting the measurement unit to a PC
Data transfer to and from the measurement unit
takes place through the docking station. It contains
the USB interface connecting the instrument with a
PC.
The connection point for the USB cable is located
on the back of the docking station. Plug in the cable
included with delivery.
To transfer data, the instrument must be inserted
into the docking station.
The data transfer itself takes place with the smart-
chart program, which is included with delivery.
Set up the computer and additional instruments as
described in the corresponding manuals. To transfer
data, the connection cable must be connected to a
USB port. For the position and assignment of the
socket, please refer to your computer manual.