ALTANA Cloud-Runner Manual - Manual (Page 39)

38
Memory
11.2 Configuration Change
This function allows to modify the configuration of an
existing memory. A menu appears with a list of the
existing memories and organizers.
Select the desired memory.
A menu then appears listing the configuration of the
selected memory. To change the settings, refer to
chapter 9 and 10.
To exit the menu, activate the arrow at the top of the
menu.
Note: Changes to the settings of Organizer files are
not permitted. If an Organizer is selected, a warning
message will appear.
The configuration can only be changed if no
readings are saved in the selected memory. Before
changing, first backup the readings and then delete
the data.
11.3 Configuration Delete
The delete function opens the selection menu for the
memories which are present.
Select the memory to be deleted.
A display appears to confirm the deletion process.
The instrument returns to the Memory menu.
Note: Deletion of a memory that contains
measurement data is not permitted.
If necessary, use the Data Delete function described
at the end of this chapter.
Deletion of an Organizer is only permitted if its
corresponding lock-function is deactivated in the
smart-chart software (organizer protected).