Cobra Electronics CP-9125 - Manual (Page 13)

Operation Operation
21 20
Last Number
Instant Redial Last Number Delayed Redial
If steps 1,2 and 3 from the “Last Number Instant
Redial” still result in a busy signal,hang up. If you
would like to try again in a few minutes, push and
release TALK button for dial tone, then:
Last Number
Delayed Redial Last Number Instant Redial
Each time you dial a number, that number is
stored in the REDIAL memor y. Up to 32 digits can
be stored. To redial the number after receiving a
busy signal:
Push and release REDIAL/PAUSE button.
The number will be redialed.
Push and release FLASH button.
Listen for dial tone.
1
2
3
4
handset base or handset base or
Push and release REDIAL/PAUSE button.
The number will be redialed.
3
4
CP9125manual(6.12) 10/20/98 11:38 AM Page 26