Cobra Electronics CP-9125 - Manual (Page 16)

Low Batt
Intercom
The LED will flash and the handset
will beep.
The and LED will light on the base.
Four beeps will emit from the base.
Begin talking.
Intercom Mode
From The Base
27
Note
To initiate INTERCOM while on
a call,push and release
button.Then push and release
button.
Proceed following INTERCOM
instructions.
Note
Only the handset can end
INTERCOM mode. Push and
release button to end.
Operation Operation
Intercom Mode From The Handset
Your CP-9125 can serve as an intercom between
the base and the handset. To utilize this feature:
Note
Intercom may be initiated from
either the handset or the base .
26
Intercom Mode
From The
Handset Intercom Mode The From Base
Push and release button. The LED
will illuminate.
1
2
3
Push and release button. The LED
will flash on the base.
1
2
Int/Page
In Use Intercom
Intercom
Page/Find
In Use Intercom
Page/Find
Low Batt
Intercom
Int/Page
Hold
CP9125manual(6.12) 10/20/98 11:38 AM Page 32