American Access Systems Advantage DKSII - Regular - 24-1000i - Manual (Page 13)

Page 13 American Access Systems / Security Brands, Inc.
“303”
SubMode 303 (SET CLOCK DATE)
DESCRIPTION: The ADVANTAGE DKS II unit incorporates an on board 365 day a year calendar and also adjusts for
LEAP YEAR. Years can be entered up to 2025.
To set the clock date enter the 5 digit “MASTER CODE” followed by submode “303” then the “MONTH” and “DAY” and
“YEAR”.
Example: 06/20/95 = “06” + “20” + “95”
04/08/2003 = “04” + “08” + “03”
The unit will respond with a GOODBEEP and exit from the program mode after the DATE has been accepted into the
unit. Should you make an entry error, simply press the * key and reenter the correct data.
“304”
SubMode 304 (ERASE MEMORY AND FILL WITH RANDOM CODES)
DESCRIPTION: The ADVANTAGE DKS II unit incorporates an RCG (Random Code Generator). This sub-mode will delete
all current access codes and fill the memory with randomly generated codes. This sub-mode will not affect managers
codes, sleep code, latch codes, relay B codes.
To start the RCG enter the 5 digit “MASTER CODE” followed by submode “304” followed again by the master code.
(MASTER CODE) + 304 + (MASTER CODE)
Example: 01251 + 304 + 01251
THE UNIT LED’S WILL START FLASHING AS IT’S GENERATING CODES. WHEN IT IS FINISHED THE LED’S WILL STOP AND THE UNIT
WILL GIVE A GOOD BEEP. NOTE: THIS WILL TAKE A FEW MINUTES. FOR A 2000 CODE UNIT THIS CAN TAKE AS LONG AS 20
MINUTES. AFTER THE UNIT IS THROUGH GENERATING CODES SEE SUB-MODE 401 TO PRINT OUT THE ACCESS CODES THAT
WERE GENERATED.
“305”
SubMode 305 (GENERATE SPECIFIC NUMBER OF RANDOM CODES)
DESCRIPTION: The ADVANTAGE DKS II unit incorporates an RCG (Random Code Generator). This sub-mode will leave
the current access codes in the system and will generate and store a user specified number of codes. This sub-mode
will not affect managers codes, sleep code, latch codes, relay B codes.
To start the RCG enter the 5 digit “MASTER CODE” followed by submode “305” followed by the number of codes to be
generated.
(MASTER CODE) + 305 + (NUMBER OF CODES TO BE GENERATED)
Example: 75 codes for model 24-100 & 24-500: 01251 + 305 + 075
Example: . 75 codes for model 24-1000 & 24-2000: 01251 + 305 + 0075
Example: 3 codes for model 24-100 & 24-500: 01251 + 305 + 003
Example: 3 codes for model 24-1000 & 24-2000: 01251 + 305 + 0003
THE UNIT LED’S WILL START FLASHING AS IT’S GENERATING CODES. WHEN IT IS FINISHED THE LED’S WILL STOP AND THE
UNIT WILL GIVE A GOOD BEEP. NOTE: THIS COULD TAKE A FEW MINUTES DEPENDING ON THE NUMBER OF CODES TO BE
GENERATED. AFTER THE UNIT IS THROUGH GENERATING CODES IT WILL PRINT OUT THE NUMBER OF CODES GENERATED
(EG. 75 CODES CREATED). IF YOU TRY TO GENERATE SAY 75 CODES BUT THERE IS ONLY 71 SPACES LEFT IN MEMORY, THE
UNIT WILL GENERATE 71 CODES AND PRINT OUT “71 RANDOM CODES CREATED”. IF MEMORY IS FULL WHEN YOU TRY TO
GENERATE CODES, THE UNIT WILL PRINT “***MEMORY FULL***”. SEE SUB-MODE 401 TO PRINT OUT THE ACCESS CODES
THAT WERE GENERATED.
digit “MASTER CODE” other wise press # to exit.