American Access Systems Prox Card Reader - 23-206 - Manual (Page 16)

Page 16 American Access Systems / Security Brands, Inc.
“404”
SubMode 404 (RED PRINTING ON INVALID CODES)
This option is only available if you are using an AAS idp562 citizen printer. The option will print out every invalid code in
red. This feature is disabled by default. To toggle this feature on or off press:
(MASTER CODE) + 404(*) + (MASTER CODE)
(*) 1 BEEP AND RED LED ON = FEATURE ENABLED
(*) 2 BEEP AND RED LED OFF = FEATURE DISABLED
“405”
SubMode 405 (PRINT OUT CURRENT UNIT CONFIGURATION)
This is a very convenient way to see what is the PROX 2000 II current configuration. This will print out the status of Split
Relay, APB, Quiet Mode, and red printing. To print out the configuration press:
(MASTER CODE) + 405
“499”
SubMode 499 (CLEAR HISTORY BUFFER)
To clear the entire contents of the history buffer enter the 4 digit “MASTER CODE” followed by submode “499” and
then reenter the 4 digit “MASTER CODE”.
(MASTER CODE) + 499 + (MASTER CODE)
The LED’s will flash on and off and respond with a GOODBEEP when finished. Should you make an entry error, simply
press the * key and reenter the correct data.