American Diagnostic Corporation (ADC) Adstation 5610 - Manual (Page 5)

in the rocker switch (3) indicates that the instrument is ready to use. Each handle (5)
is automatically ready to operate at 100% light intensity as soon as it is taken out of
the cradle (7). The handle automatically switches off when replaced back into the
cradle (7).
7.1. LIGHT INTENSITY MODULATION
The modulation of light intensity can be done with the handle; twist the switching
ring in a clockwise or counter-clockwise direction and the light will get stronger or
weaker.
Attention!
The handle switches off automatically after about 2 minutes.Make sure that no more
than 3 handles are used at the same time! If more than 3 handles are used at the
same time, the transformer in the instrument may become overloaded and switch
itself off.
8. CLEANING AND DISINFECTION
The ADC ® Diagnostix™ Adstation™ with extension module can be cleaned
externally with a moist cloth. Furthermore, it can also be disinfected from the
outside.
Aldehyde (formaldehyde, glutaraldeyhde, aldehyde derivatives), surfactants or
alcohol may be used.
Refer to disinfectant manufacturers instructions for use.
Always use a soft lint free cloth or cotton swabs to prevent damage to your ADC ®
Diagnostix™ Adstation™.
Attention!
We recommend unplugging the instrument before cleaning or disinfection.
Take care while cleaning and disinfecting that no liquid enters inside the instrument!
Sterilization
According to the Test Centre for Medical Devices in Tu
̈bingen, Germany, sterilization
is only prescribed in the case of operative procedures.