Ameri-King AK-451-ELT - Manual (Page 18)

18
The AK-451 ELT described in this manual was designed, tested and certified as a
complete system including the following components:

ELT Transmitter w/ integral battery

ELT Mounting Tray and clamp Holder

ELT Antenna and Coaxial Cable Assembly

ELT Remote Switch and Remote Wiring Cable Assembly

ELT Audible Buzzer Monitor unit and T-Adapter Connector
Note:
Only Ameri-King approved system components may be used for a TSO approved
system.
1.2.3 Certification:
The AK-451 has been certified to the following:

FAA TSO-C126, C91a, C142

ETSO-2C126 per European Aviation Safety Agency (EASA)

FAR Part 91 – mandatory automatic ELT requirements

Cospas-Sarsat T.001

47 CFR Part 87 (FCC requirements) Note: Per FCC regulations 47
CFR § 2.902, the ELT is tested per “Verification” method.
Note:
The AK-451 is certified to meet the requirements of FAA TSO-C126, TSO-C91a and
EASA ETSO-2C126 per EUROCAE ED-62. For use outside the US or EASA
member states, contact your local civil aviation authority for ELT requirements.
1.2.4 Programming:
Ameri-King will program in any protocol at no charge. The AK-451 supports all
available worldwide ELT protocols in long message and short message. For a
complete ELT protocol, please see C/S document G.005 and T.001 available at
www.cospas-sarsat.com. For use outside the US, please contact your local civil
aviation authority for accepted or required programming protocols.
The AK-451 supports the following protocols:
1.2.4.1 User Location Protocols (Long Message):

Coding ELT with beacon serial identification

Coding ELT with aircraft operator designator and a serial number

Coding ELT with aircraft 24-bit address

Coding ELT with aircraft nationality and registration marking