Ameri-King TS-451 - Manual (Page 113)

AMERI-KING CORPORATION
17881 Sampson Lane, Huntington Beach, CA 92648 - Tel (714) 842-8555 - Fax (714) 842-4235 - Email: [email protected]
113
Example 16: How to change Country from U.S.A. Standard Location with 24-
bit address AF0F0F to Brazil Standard Location with Serial Number 392
(Long Message):
Sample hex code for U.S.A.:
971 3AF0F0F 7FDFF E24B0B 583E0FAA8
971 = U.S.A. country code in hex format
3AF0F0F = 24-bit address AF0F0F, to be changed to Serial Number 392
E24B0B = bits 85 to 108. When country code is changed, this 6-digit hex must also be adjusted
to make sure that BCH1 Encoded and BCH1 Calculated are ALWAYS identical.
Our goal is to convert the above hex code to Brazil, Standard Location with Serial Number 392.
Step 1:
To change to your desired country, replace
971 with your desired country code from TABLE 1
on page 4, under “Country code in Hex format (Location Protocol).”
For example: 8CD for Belgium, 8E4 for France, 971 for U.S.A.
If your desired country is not included in the table, you have to convert your desired country
code to hex format yourself.
Step a: Convert your desired country code (in this example 710) from decimal format to
binary format:
Use the included conversion tool “451 OM-TS-451 Decimal and Binary Conversion
Tool.mht” or go to
http://acc6.its.brooklyn.cuny.edu/~gurwitz/core5/nav2tool.html
(Internet browser is required) to convert your desired country code (in decimal format) to
binary format
NOTE: You must click on “Try it again!” button before every new conversion.
Below are step-by-step instructions on how to convert your desired country code from
decimal format to binary format: