Ameri-King TS-451 - Manual (Page 23)

AMERI-KING CORPORATION
17881 Sampson Lane, Huntington Beach, CA 92648 - Tel (714) 842-8555 - Fax (714) 842-4235 - Email: [email protected]
23
Example 3: How to change Country from U.S.A. (369) to Brazil (710) -
Aviation User with the same Tail Number N-13FY (Short message):
Sample hex code for U.S.A.:
571 324CC3A86DA8 C03C33 E
571 = U.S.A. country code in hex format
C03C33 = bits 85 to 108. When country code is changed, this 6-digit hex must also be adjusted
to make sure that Encoded BCH1 and Calculated BCH1 are ALWAYS identical.
Our goal is to convert the above hex code to Brazil, Aviation User with Tail Number
N-13FY.
Step 1:
To change to your desired country, replace
571 with your desired country code from TABLE 1
on page 4, under “Country Code in Hex format (Serial User).”
For example: 4CD for Belgium, 4E4 for France, 571 for U.S.A.
If your desired country is not included in the table, you have to convert your desired country
code to hex format yourself.
Step a: Convert your desired country code (in this example 710) from decimal format to
binary format:
Use the included conversion tool “451 OM-TS-451 Decimal and Binary Conversion
Tool.mht” or go to
http://acc6.its.brooklyn.cuny.edu/~gurwitz/core5/nav2tool.html
(Internet browser is required) to convert your desired country code (in decimal format) to
binary format
NOTE: You must click on “Try it again!” button before every new conversion.
Below are step-by-step instructions on how to convert your desired country code from
decimal format to binary format: