Casio KL-7000 - Manual (Page 39)

38
Manual Feed
A B X Y Z
• Label Length
The
label length is the print area, plus the side spaces.
Settings you make for side spaces, block spacing, and mirror printing affect the entire label
length.
Creating and Deleting Blocks
The following procedures describe how to create and delete blocks. Later you will learn
how you can change certain settings on a block-by-block basis.
To create a block
Example: To input the text “ABXYZ Computer Company” and create two blocks: “ABXYZ”
and “Computer Company”.
1. Input the text.
2. Move the cursor to the space between “ABXYZ” and “Computer Company”.
3. Press BLOCK.
• If you wanted to break the text up into three blocks,
you would input another block mark.
To delete a block mark
To delete a block mark, use the procedures for BS and DEL as described under “Deleting
Individual Characters”.
Character Pitch
The term character pitch refers to the relative spacing between characters. The Label Printer
provides three character pitches from which to choose: NONE (0mm), NARROW (0.5mm),
and WIDE (1mm).
The character pitch setting you make is applied only to the block where the cursor is
located when you perform the setting operation.
• The default character pitch setting is NONE.
To specify the character pitch
Example: For the two-block text “ABXYZ”, “Computer Company”, to change the spacing
of “ABXYZ” to WIDE.
FUNC
SHIFT
CODE
VERT
MIROR
OVER
2 ✕ 2
13 6cm
Comp B
L