Casio KL-7000 - Manual (Page 53)

52
2. Use K and L to highlight LAYOUT, and then press
SET.
• If the message “CLEARS INPUT TEXT!” appears
on the display, press SET to clear previously input
text or ESC to abort the operation without clearing
input text.
3. Use K and L to move the highlighting to the type
of layout you want, and then press SET.
• In this example, highlight VIDEO.
4. Use
K and L to highlight the type of video tape
label you want, and then press SET.
• In this example, highlight 8mm.
5. Use H and J to display the variation you want, and
then press SET.
• In this example, display 8mm (1).
• The text section that is flashing on the display is
the one that is selected for text input.
6. Input the text for the flashing section.
7. After you input text for a section, press SET to move to the next section.
8. Repeat steps 6 and 7 for each section.
• When the section for the illustration is flashing, you will note that there is already an
illustration there. Use BS or DEL to delete the illustration, and then input the new
illustration
.
• See page 22 for details on inputting illustrations.
• When you press SET after inputting the illustra-
tion, the display shows the following menu.
9. Use K and L to highlight the operation you want and then press SET.
• Highlight PRINT to print the label.
• Highlight STORE to store the label in memory (see “To store a preset layout label in
memory”).
• Highlight EXIT to exit the label operation without storing the label you created in
memory.
FUNC
SHIFT
CODE
VERT
MIROR
OVER
CAPS
A
A A
A
SANS-SERIF
MANUAL FEED
6mm
SET Yes No ESC
A
8mm
1 2
FUNC
SHIFT
CODE
VERT
MIROR
OVER
CAPS
SET Yes No ESC
8mm
FUNC
SHIFT
CODE
VERT
MIROR
OVER
CAPS
A
A
SET Yes No ESC
VIDEO
AUDIO
NAME/FIL
MEM DATA
FUNC
SHIFT
CODE
VERT
MIROR
OVER
CAPS
A
A
SET Yes No ESC
VHS
VHS C
8mm
BETA
FUNC
SHIFT
CODE
VERT
MIROR
OVER
CAPS
A
A
SET Yes No ESC
PRINT
STORE
NEW
EXIT