Chapter 9 settings, 1 wireless & network settings – AOC MW0812 User Manual

Page 52

Advertising
background image

-47-

Chapter 9 Settings

In the main interface, tap the “Settings” icon or press the M button to show the settings

button to go to the “Settings” interface.

9.1 Wireless & network settings

9.1.1 Wi-Fi network connection

Connection

1. Tap “Wi-Fi” to enable Wi-Fi and this product scans for available wireless networks.

2. Tap “Wi-Fi Settings” and the Wi-Fi network zone shows the name and security

settings (open or encrypted network) of the detected wireless networks.

3. Tap one to connect to it. When you select an open network, the product can connect

to it automatically. If you select an encrypted one, you have to enter a password and

tap “Connect”.

Note 1: When you connect Wi-Fi for the first time and the prompt “Failed” appears,

disconnect Wi-Fi and reconnect it.

Note 2: You do not have to re-enter the password when you re-connect to the

previously connected wireless network that is encrypted, unless you reset the product

to the factory settings.

Note 3: Auto search for Wi-Fi is performed, i.e., no additional steps are required to

connect to the Wi-Fi network. For some closed wireless networks, the username or

password may be required.

Note 4: The availability of Wi-Fi signals may depend on the amount, infrastructure,

and objects through which a signals must pass.

4. Tap “Wi-Fi” to disconnect the network.

Scan

Press the M button to configure the “Scan” or “Advanced” settings for Wi-Fi network.

Scan: Search for the available wireless networks in the vicinity.

Advertising