AOC MW0812 - Manual (Page 64)

Chapter 13 Firmware Updating / Resetting to Factory
1. Go to for the website (www.aoc.com) to download the current /latest firmware for your
device,
(current-<model-ID>.img).
2. Copy the downloaded firmware to the built-in flash in the product.
3. Safely disconnect the product and PC and the screen shows a prompt similar to one shown
below:
Tap “Install”.
After a short while, the updating message is displayed..
It may take a few minutes, please be patient.
4. After successful upgrade, the system will automatically reboot and the downloaded version
firmware takes effect.
Note : During the upgrade / resetting process, it is best to have the device plugged into
electric power, using the supplied power adapter.
.
-59-