AquaCraft Vela One Meter - Manual (Page 8)

8
Unroll the sails on your work table. The larger sail is
the mainsail and the smaller one is the jib.
Lay out the mast on your work table. You will notice
there are two sections of mast (upper and lower),
along with pre-attached and labeled lines.
Slip the mast joiner into the lower mast. If you feel you have no
need to break down the mast, you can epoxy the halves together;
just remember you are not going to be able to take it back apart.
Place the lower mast into the mast pocket on the top deck
of the hull. You might want to lean the mast against a wall
or have somebody help you stabilize it as you work.