AquaCraft Wildcat - Manual (Page 4)

44
UNDERSTANDING YOUR TRANSMITTER
To help you better understand your transmitter and its functions,
here is a picture identifying the operational features.
1 Steering Wheel
2 LED Power Indicator
3 Power ON/OFF Button
4 Throttle Trigger
5 Steering Rate Adjustment (this is used to increase or decrease
the turning radius of the boat)
6 Throttle Reversing Switch (“R” is the position the switch needs
to be in for your Wildcat EP)
7 Throttle Trim Dial (this should be in the 2:00 o’clock position)
8 Steering Trim (this is used to adjust the tracking of the boat)
9 Steering Reversing Switch (this should be in the “R” position to
operate your Wildcat EP)
ASSEMBLY SEQUENCE
INSTALLING THE TRANSMITTER BATTERIES
Install 4 “AA” batteries into the transmitter in the confi guration
molded into the battery fl oor.
Note: Turn the transmitter “ON” by pressing the button on the
right side of the transmitter. The battery level indicator light (LED)
should glow red. If the light is fl ashing the batteries are low and
need to be replaced.
INSTALLING THE BATTERY PACK IN THE BOAT
Remove the canopy by rotating the lock near the front of the
windshield.
Lift and remove the cowl from the boat.
AQUB1810 Wildcat EP Mnl.indd 4 AQUB1810 Wildcat EP Mnl.indd 4 10/3/2011 2:04:50 PM 10/3/2011 2:04:50 PM