AquaCraft Wildcat - Manual (Page 7)

7
Tighten the set screws to hold the drive shaft in place. Do not over
tighten the set screws. It is also a good idea to tighten one screw
lightly and then the other. Go back and forth between screws to
keep even tension on the drive shaft.
Now is also a good time to place a drop of light oil on the
motor bearing.
ORDERING REPLACEMENT PARTS
To order replacement parts for the AquaCraft
Wildcat EP use the order numbers in
the replacement parts list that follows.
Replacement parts can be purchased from
your local hobby shop or by mail order. If
you need assistance locating a dealer to
purchase parts, visit www.hobbico.com and
click on “Where to buy”. If you are missing
parts, contact Hobbico Product Support at:
Phone: 217.398.8970
Fax: 217.398.7721
E-mail: [email protected]
Cowl Wildcat EP
Drive Cable with Prop Shaft Wildcat EP
Servo Rudder Linkage Wildcat EP
Motor Mount with Water cooling Wildcat EP
Strut Bracket Wildcat EP
50-Amp water cooled controller Wildcat EP
1800Kv Outrunner Brushless Motor Wildcat EP
Radio Box Lid Wildcat EP
Radio Box Wildcat EP
Rudders with Rudder Bolts
Rudder Mount Bracket with Pivot Brackets
Rudder Control Arm Pivots
Rudder Arm Linkage Set Rio EP, Wildcat EP
42mm FRP Prop Rio EP, Wildcat EP
Rudder Nylon Break-Away Bolts and Nuts
Rudder Pivot Hinge Pins and Set Screws
Transom Drain Plug Mini Thunder, Rio EP, Wildcat EP
Cowl Latch Mini Rio, Thunder, Rio EP, Wildcat EP
Motor Coupler Rio EP, Wildcat EP
Transom Water Pick Up Mini Rio, Thunder, Rio EP, Wildcat EP
AQUM7050 Steering Servo Mini Rio, RR2, Thunder, Rio EP, Wildcat EP
AQUB7852 Drive Dog with Prop Nut Hammer EP, Rio EP, Wildcat EP
TACJ0245 Tactic 2.4GHz Pistol Grip Transmitter and Receiver AQUB6235
AQUB8001
AQUB9013
AQUB7909
AQUB8803
AQUM7000
AQUG7004
AQUB8615
AQUB8616
AQUB8741
AQUB8743
AQUB8740
AQUB8744
AQUB7797
AQUB7901
AQUB8745
AQUB9277
AQUB6402
AQUB7908
AQUB9045
AQUM7050
AQUB7852
TACJ0245
AQUB1810 Wildcat EP Mnl.indd 7 AQUB1810 Wildcat EP Mnl.indd 7 10/3/2011 2:04:56 PM 10/3/2011 2:04:56 PM