Artison Studio 39 User Manual
Page 12
12
HARDWARE KIT
7.
Mounting Screw Selection
7.1.1.
Match the threads in the FPTV chassis to one from the kit.
Thread: M4, M5, M6, M8, or M10.
7.1.2.
First, check the thread depth of the mounting points on the FPTV.
7.1.3.
Using the Television Mounting Brackets (Depth = 6.5mm), third party
wall-mount, and washers. Allow for 5 - 8 mm of screw threads into the FPTV
chassis. Be sure to account for the maximum thread depth into the TV.
8.
Flat Washer: Select a washer that fits around the selected Mounting Screw.
9.
If applicable, place your wall mounting brackets that the television will be hung by on
top of the Television Mounting Brackets.
10.
Then loosely thread the mounting screws thru all of the bracket assemblies.
11.
Tighten the screws on the rear of the television to hold all of the brackets in place on
the chassis.
12.
You may now hang your FPTV on the wall, or place it onto the table stand.