Artison Studio 39 - Manual (Page 3)

3
Thank you for choosing the Artison STUDIO SoundBar Speaker. We are pleased
that you have selected our high-performance audio product.
The following
information will guide you through the installation of your Artison STUDIO
SoundBar Speaker.
INTRODUCTION
Artison STUDIO SoundBars are designed to attach directly to any Flat Panel TV (FPTV)
with the included hardware, brackets, and come with custom made grilles. Studio
SoundBars contain a Center Channel, Left Channel, and Right Channel; all housed in one
aluminum enclosure. All 3 speakers have independent air chambers and crossovers.
This creates one TOTAL INVOLVEMENT EXPERIENCE™.
The STUDIO SoundBar attaches to any FPTV using the VESA mounting points on the
rear surface. Using the Thin UMB, the LCR DM speakers can be attached to any FPTV in
a table top application or a wall-mount application in conjunction with a FPTV wall-mount
bracket.
G ST Grilles are available customized to the width and bezel color of any FPTV. Artison
maintains a database of popular FPTV’s and can match the exact width of any set. Any
Artison Dealer can order a custom made grille for your FPTV.
G ST Grilles used with Studio 39 are compatible with any FPTV that is 38.0”inches wide
tall or larger. G ST Grilles used with Studio 46 are compatible with any FPTV that is
45.4”inches wide tall or larger. G ST Grilles used with Studio 55 are compatible with any
FPTV that is 54.1”inches wide tall or larger.
All STUDIO models are compatible with displays that are 25.4 mm – 200 mm, (1.0” – 3.6”)
in depth.