Avlink BX-3088 - Manual (Page 22)

BX Matrix Switching Systems—User Manual
21
Figure 7-1 《AV Matrix》Control Software Usage Interface
Scroll on the left lower corner to view contents as shown below.
7.0.2.1 Main Operation Interface Features
Refer to the window menu above, the interface blue area shows crossing matrix of output
ports 01-08 and input ports of 01-08. On the lower right hand corner, you can select either
“Video” for signal input switching or “Disconnect”to close all output ports. Click to check the
white box to the left of “Video” for video signal transimission.
Examples for Selecting Matrix Switching Functions:
Example 1: Now there is a BX-3088 matrix having all the input/output ports properly
connected to the equipment. There are two ways of operation if you want to set channel 1 video
to channels 2, 3 and 5 for output and channel 3 video to channel 6 for output:
First way: Select the corresponding icon on the matrix and directly click to turn it into
，switching is then completed.