Avlink BX-3088 - Manual (Page 24)

BX Matrix Switching Systems—User Manual
23
Step 2: Press the “Disconnect” key;
Step 3: Press the previously-pressed output number keys 03, 05 and 06 (or press the
“Deselect all output”key) to complete the operation.
The final results will be as shown in Figure 8-3 below:
Figure 8-3
7.0.2.3 Select all output、DeSelect all output Switching Function Usage
（1）Select all output Function Description: You can use this function to select one port for input
and all output ports for output.
A specific example of operation is described below:
Example: Now, you have a BX-3088 matrix with all input and output ports properly
connected to the equipment. The needed input/output ports should be set to video channel 1
while switching all output ports to output.
Press the “Select all output” key, then press the input number key 01 below. Press all the icons
along 01 row to turn into to complete the operation.
（2）”DeSelect all output”function description: it is used to close “Select all output” function.
7.0.2.4 Disconnect all Command
Function Description: To close all the switching methods.
Press the “Disconnect all” key to close connection to all input and output ports.