Avlink PG-H1Z - Manual (Page 12)

12
2.2 Connect PG to Monitor
ƒ Connect the attached DC adapter cable from your device
to the power source (outlet).
ƒ Connect the cable from your device to the Digital
monitor/TV.
- PG-H1Z: Please connect the HDMI 3M cable from
PG-H1Z to the Digital monitor/TV
- PG-V1Z: Please connect the VGA cable from PG-V1Z
to the Digital monitor/TV.
- PG-Y1Z: Please connect the RCA cable from PG-Y1Z
to the Monitor/TV.
ƒ Power on the Digital monitor/TV.
ƒ Push the Power SW of your device to power on/off your
device.
Caution
Please use the Pile Alkaline to the device.
Cable
or Twins pair
Digital monitor/TV