Avlink PG-H1Z - Manual (Page 3)

3
Chapter 1 Introduction
PG-H1Z/V1Z/Y1Z series are the test pattern generator
designed to be a useful tool for the new generation of digital
video/monitor products. They are simple versions to support
up to 8 patterns for you to test and calibrate a digital
video/monitor. Further, it also can also help you to improve
the quality of digital video/monitor with side-by-side
comparisons. Through the friendly interface and smart
design, not only you can easy and quick to use the device
but also you can reduce your test expenditure.
Caution
To avoid and minimize the risk of damage to the device,
please pay attention to the safety instructions even though
the device had been tested for conformance to safety
requirements and certified for international using.
ƒ Follow all instructions marked on the device during using.
ƒ Do not attempt to maintain the device by yourself, any
faults, please contact your vendor.
ƒ Provide proper ventilation and air circulation and do not
use near water.
ƒ It is better to keep it in a dry environment.
ƒ Only using the power adapter and connection cables that
are supported with the device.
ƒ Please use the Pile Alkaline and the working time for the
battery is about 2~4.5hours.
ƒ It is better to charge the battery when the battery power
indicator becomes low.
ƒ Do not use liquid or aerosol cleaners to clean the device.
ƒ Always unplug the power to the device before cleaning.
1.1 Package Contents
ƒ 1 pattern generator (PG-H1Z, PG-V1Z or PG-Y1Z)
ƒ 1 power adapter DC 9V (for USA, UK or Europe DC plug.)
ƒ 1 user manual
ƒ 1 related cable (HDMI 1.2M cable for PG-H1Z, VGA 1.2M
cable for PG-V1Z or YPbPr cable for PG-Y1Z)
ƒ 1 9V Pile Alkaline
All packages have been checked carefully for their
completeness and functionality before shipped. Please
contact with your vendor if any items listed as above are
missed or damaged.