BASO VLV49A Series - Manual

Technical Bulletin VLV
Issue Date 0100
© 2004 BASO Gas Products 1
Part No. 24-8711-455, Rev.
⎯
www.baso.com
Grommet
Blue
Red Black
To Terminal 1
To Terminal 5
or Ground
Screw B
Screw A
Pilot Tap
Connection
To Terminal 3
Valve
Inlet
Figure 1: Universal Replacement Gas Valve
The VLV49A Series Universal Replacement Gas Valve is for the
replacement of the valve assembly of an electronic proven pilot spark
ignition control with a valve (i.e., G60 and Q15). They are combination
redundant valves, available with or without a pressure regulator.
These valves can be used on appliances burning natural gas, Liquefied
Petroleum (LP) gas, manufactured gas, mixed gas or LP gas-air mixtures,
including sulfur bearing gases (depending on the regulator selection) at
pressures up to 35 mbar (0.5 psi).
VLV49A Series Universal Replacement Gas Valve
Application