Behlen 54150178 - Manual (Page 6)

ASSEMBLY INSTRUCTIONS
Instructions for Cleaning the Valve
STEP 1:
Remove the packaging tape from around the top
of the valve.
STEP 2:
Slip off the cover and lift the lever to remove the
plunger.
STEP 3:
Clean the rubber part of the plunger and opening
to the valve of any calcium or dirt buildup that
may be obstructing the normal operation of the
valve.
Lever
Plunger
STEP 4:
If the rubber seal is grooved but still pliable (not
hard and brittle) you may flip it over and use
the backside of the seal.
STEP 5:
Replace the plunger with the nipple facing you,
and the rubber facing the valve.
STEP 6:
Replace the cover to complete the cleaning of
the valve.
Rubber
Valve Opening
F-20201 8-18-04