Passing another vehicle while using cruise control, Using cruise control on hills, Ending cruise control – Buick 2000 Park Avenue User Manual

Page 107: Erasing speed memory, Exterior lamps, Headlamps

Advertising
background image

2-42

Passing Another Vehicle While Using Cruise Control

Use the accelerator pedal to increase your speed. When
you take your foot off the pedal, your vehicle will slow
down to the cruise control speed you set earlier.

Using Cruise Control on Hills

How well your cruise control will work on hills depends
upon your speed, load and the steepness of the hills.
When going up steep hills, you may have to step on the
accelerator pedal to maintain your speed. When going
downhill, you may have to brake or shift to a lower gear
to keep your speed down. Of course, applying the brake
takes you out of cruise control. Many drivers find this to
be too much trouble and don’t use cruise control on
steep hills.

Ending Cruise Control

There are two ways to turn off the cruise control:
D Step lightly on the brake pedal, or
D Move the cruise switch to OFF. The CRUISE light

will also go out.

Erasing Speed Memory

When you turn off the cruise control or the ignition,
your cruise control set speed memory is erased.

Exterior Lamps

Headlamps

This knob controls the
following systems:

D Headlamps
D Taillamps
D Parking Lamps
D License Lamps
D Sidemarker Lamps
D Instrument Panel Lights
D Interior Courtesy Lamps

Advertising