Power remote control mirror, Parallel park assist mirror (if equipped) – Buick 2000 Park Avenue User Manual

Page 117

Advertising
background image

2-52

Power Remote Control Mirror

Your vehicle has an electric mirror control located on
the driver’s door armrest.

Move the switch below the control to choose the right or
left mirror. If you place the switch in the center position,
no movement of the mirror will occur. To adjust the
mirror, push the arrow control in the direction you want
the mirror to go.

Adjust each mirror so you can see some of the side of
your vehicle and the area behind your vehicle.

If your vehicle is equipped with the optional memory
seat and mirrors feature, these mirror positions, along
with the driver’s seat position can be stored in memory.
See “Memory Seat and Mirrors” in the Index.

Parallel Park Assist Mirror (If Equipped)

If you have the optional DIC feature, the passenger’s
outside rearview mirror also includes a tilt

-

down feature

that operates when the shift lever is in REVERSE (R).
When the vehicle is shifted out of REVERSE (R),
the passenger mirror will return to its original position
after a five

-

second delay. This delay prevents movement

of the mirror if multiple gear transitions (reverse to drive
to reverse) occur during a parallel parking maneuver.
This feature can be programmed on or off through the
Personal Choice selection menu. Vehicles are delivered
with this feature off. See “Driver Information Center” or
“Personal Choice Features” in the Index for
programming instructions.

Advertising