Delayed locking – Buick 2000 Park Avenue User Manual

Page 71

Advertising
background image

2-6

To change modes:

1. Close all the doors and turn the ignition on.

Keep all doors closed throughout this procedure.

2. Press and hold LOCK on the power door lock switch

on the driver’s door through Step 4.

3. Press the button with the lock symbol on the remote

keyless entry transmitter to enter the programming
mode. The memory door lock mode will remain in
the current mode.

4. Press the button with the lock symbol on the

transmitter again. Each time the button with the lock
symbol is pressed, the mode will advance by one,
going from Mode 3 to Mode 0 to Mode 1, etc.

For each press of the button with the lock symbol,
the door locks will activate in the same manner they
would activate in the corresponding memory door
lock mode. For example, pressing the button with the
lock symbol on the transmitter to advance to Mode 2
would result in all doors locking and then,
only the driver’s door would unlock. For Mode 0,
no locking or unlocking will occur.

5. Release the power door lock switch and turn the

ignition off. The automatic door locks will remain in
the most recent mode selected.

You can also program the automatic door locks feature
using the Driver Information Center. See “Driver
Information Center Personal Choice Programming” in
the Index.

Delayed Locking

This feature lets the driver delay the actual locking of
the vehicle. When the power door lock switch or the
remote keyless entry button with the lock symbol is
pressed with the key removed from the ignition and the
driver’s door open, a chime will sound three times to
signal that the lock delay mode is active. When all doors
have been closed, the doors will lock automatically after
five seconds. If any door is opened before this, the
five

-

second timer will reset itself once all the doors have

been closed again.

Pressing the door lock switch or the remote keyless
entry button with the lock symbol a second time will
override this feature.

The delayed locking feature can be turned on or off for
each remote keyless entry transmitter.

Advertising