Entering the driver exit settings submenu, Driver exit settings submenu items – Cadillac 2006 STS User Manual

Page 143

Advertising
background image

Entering the Driver Exit Settings
Submenu

To enter the memory programming mode for your exit
settings, use the following procedure:

1. Be sure the ignition is either on, in ACC position, or

in RAP and place the transmission in PARK (P) or
the vehicle speed is less than 6 mph (9 km/h).

2. Press any button on the appropriate keyless access

transmitter to identify yourself as Driver 1 or
Driver 2.

3. Turn on the radio by pressing the

power/volume knob.

4. Press the CNFG radio button to enter the main

menu of the radio.

5. Turn the tune/select knob and scroll to SETUP.

6. Press the tune/select knob to enter the

SETUP menu.

7. Turn the tune/select knob and scroll to DRIVER

EXIT SETTINGS.

8. Press the tune/select knob to enter the DRIVER

EXIT SETTINGS submenu. The following items
will appear:

RECALL EXIT SETTINGS

STORE EXIT SETTINGS

Driver Exit Settings Submenu Items

RECALL EXIT SETTINGS

To recall exit settings, use the following procedure:

1. Enter the memory programming mode for your exit

settings by following the instructions listed
previously under “Entering the Driver Exit Settings
Submenu.”

2. From the DRIVER EXIT SETTINGS submenu, turn

the tune/select knob to scroll to RECALL EXIT
SETTINGS and press in the knob.

If the vehicle is in PARK (P), one beep will sound
and your previously saved exit position will then be
recalled.

If the vehicle is not in PARK (P), three beeps will
sound and your previously saved exit position
will not be recalled.

A memory recall can be stopped by pressing any
memory seat or mirror position button.

If you would like the stored exit positions to be recalled
when your vehicle is in PARK (P), the vehicle is off,
and the driver’s door is opened, see “AUTO EXIT SEAT”
and “AUTO EXIT COLUMN” under Vehicle
Personalization
on page 2-53.

2-73

Advertising